1. procedure

  1. Measure the spectrum of a standard sample.

  2. Find the edge energy in the spectrum and convert it to the angle of the monochromator (= target angle).

  3. Launch the program for energy calibration.

  4. Click the Exit button ④ of the Move Theta program.

     If this procedure is skipped, it is necessary to wait for 25 sec at 6. .
  5. Enter the target angle and the reference edge energy angle (⑤).

  6. Run and start calibration (⑥).

  7. When the calibrated values (⑦) are displayed, it is complete.